StarColor Water-based Ink SC7000 Series is a water-based ink for diapers , especially for non-porous substrates, including low density polyethylene (LDPE), high density polyethylene (HDPE), polypropylene (PP), polyethylene terephthalate (PET), and biaxially stretched polypropylene film (BOPP), etc. (Some materials need corona treatment).
This series of ink has excellent performance in adhesion, wear resistance and color concentration with higher line number and machine speed.
Product Name: diapers Water-based ink
Specification: SC7000-6
Brand: StarColor
Ingredients: Environmental water-borne acrylic resin, advanced organic pigments, water and additives.
Product characteristics: It is non-flammable, explosive, non-toxic, tasteless, harmless to human body, and meets the ROHS international environmental protection requirements.
It has excellent fluidity, good adhesion after printing, anti-wear and scratch, good water resistance, fast drying and high clarity.
Product Usage: Paper Diaper Printing
Packaging: 5KG/20KG/200KG/barrel
Storage method: Storage temperature is 5 - 35 C, sealed state shelf life is 12 months.
Instructions for Use: Stir well before use to keep the composition of water-based ink in paper cups consistent. Prevent dust falling and knotting
Dry skin, if the remaining ink contains impurities, first filter and then use with the new ink. Measuring Viscosity with Appropriate Ink before Boarding Machine
It is suggested that printing viscosity of 8-12 seconds on the machine can better guarantee the adaptability of water-based ink.
Applicable equipment: flexographic press
Viscosity: 20 + 5S
Fineness: <8 micron
PH value: 8.5-9.0
Drying speed: 40-150 m/min
Colouring power: 90-110
Shelf life: 12 months
Origin: Huizhou City, Guangdong Province
Storage: Keep in a cool and ventilated place, sealed, fire-proof and anti-sluggish, to avoid rain and other pollution.
注意事项
存储过程中，桶盖必须要盖好，以免水份挥发，造成粘度上升或结皮。
使用前必须搅拌均匀，请尽量不要与其他公司产品混合使用，未用完的出产品需密封存储。
请在使用前确认方法和效果，如有其他问题，请致电：139 2374 1604
印刷效果图：
This series of ink has excellent performance in adhesion, wear resistance and color concentration with higher line number and machine speed.
Product Name: diapers Water-based ink
Specification: SC7000-6
Brand: StarColor
Ingredients: Environmental water-borne acrylic resin, advanced organic pigments, water and additives.
Product characteristics: It is non-flammable, explosive, non-toxic, tasteless, harmless to human body, and meets the ROHS international environmental protection requirements.
It has excellent fluidity, good adhesion after printing, anti-wear and scratch, good water resistance, fast drying and high clarity.
Product Usage: Paper Diaper Printing
Packaging: 5KG/20KG/200KG/barrel
Storage method: Storage temperature is 5 - 35 C, sealed state shelf life is 12 months.
Instructions for Use: Stir well before use to keep the composition of water-based ink in paper cups consistent. Prevent dust falling and knotting
Dry skin, if the remaining ink contains impurities, first filter and then use with the new ink. Measuring Viscosity with Appropriate Ink before Boarding Machine
It is suggested that printing viscosity of 8-12 seconds on the machine can better guarantee the adaptability of water-based ink.
Applicable equipment: flexographic press
Viscosity: 20 + 5S
Fineness: <8 micron
PH value: 8.5-9.0
Drying speed: 40-150 m/min
Colouring power: 90-110
Shelf life: 12 months
Origin: Huizhou City, Guangdong Province
Storage: Keep in a cool and ventilated place, sealed, fire-proof and anti-sluggish, to avoid rain and other pollution.
注意事项
存储过程中，桶盖必须要盖好，以免水份挥发，造成粘度上升或结皮。
使用前必须搅拌均匀，请尽量不要与其他公司产品混合使用，未用完的出产品需密封存储。
请在使用前确认方法和效果，如有其他问题，请致电：139 2374 1604
印刷效果图：
